Section 18.92.080 Final Site Plan--Requirements.

A. The final plat shall be drawn to a scale of one inch equals one hundred feet and shall show:

1. The name of the manufactured home park;

2. Blocks for the names and stamps of the engineer and/or surveyor of the park. An owner's dedication block;

3. Signature lines for the Mayor and City Council members, City Recorder, Planning Commission Chairperson, City Fire Marshall, and Health Department Director;

4. A boundary description. Also, all existing survey monuments and survey monuments to be installed with the construction of the subdivision shall be shown and properly labeled and referenced;

5. North point, scale and date;

6. All easements of record shall be shown on the final plat;

7. Street numbers and names;

8. All lot numbers and site addresses. Also, all bearings, distances, and curve data for all lot lines, street center lines, right-of-way lines, etc.;

9. All public utility easements as required by the Planning Commission;

10. A vicinity map showing the location of the subdivision in relationship to the city;

11. Any notices to purchasers required by the Planning Commission.

B. The following shall be included with the final plans:

1. An updated title report for all lands proposed to be developed;

2. A revised Environmental Impact Statement if required by the Planning Commission at preliminary approval;

3. Tax clearance from the County Assessor;

4. Five (5) sets of engineering drawings, including typical street cross-sections, road, sewer, and other underground utility profiles and plans. Details showing the width and type of pavement. Location, size and type of off-site and on-site water and sewer facilities and other improvements, such as sidewalks, curbs, and gutters, parks, street lighting, and fire hydrants;

5. Record of survey map;

6. Checklist of all items discussed at preliminary approval. (Ord. 96-04B, 1996; Ord. 199 §02.1002.05, 1973)